Phase II Plus Brinell Hardness Tester Automatic Load Cell
Precision Testing With the Phase II 900-357 Hardness Tester
Tired of load overshoot and manual focus slowing down your Brinell testing? Meet a fully automatic tester built to remove the guesswork. With direct touch screen controls, a load cell driven system, and one-button testing, you get repeatable, accurate readings without wrestling with screws, dead weights, or misalignment. Just position your specimen and let the machine handle loading, focus, and measurement.
- Load Control: Closed-loop load cell system applies force with no overshoot or undershoot, accurate to within 0.5%.
- Full Automation: Automatic focus, lifting, turret rotation, and measurement mean one-button testing from start to finish.
- Touch Screen: 12-inch display shows real-time loading progress and results.
- Scale Coverage: Supports HBW2.5, HBW5, and HBW10 scales across forces from 31.25kgf to 3000kgf.
- Hardness Range: Reads 3.18~653HBW with 0.1HBW resolution.
- Unit Conversion: Converts readings to Vickers and Rockwell automatically.
- Tooling Capacity: Five work stations hold up to 2 objectives and 3 pressure heads for fast switching.
- Optics: 1X and 2X objectives with a 20X eyepiece for 20X and 40X total magnification.
- Specimen Size: Fits parts up to 330mm tall with 170mm of pressure head to outer wall clearance.
- Standards Met: Complies with EN ISO 6506, ASTM E-10-08, GB/T231.2, and JJG150-2005.
- Reporting: Optional printer connection for printed test reports.
- Power: Runs on AC220+5%, 50~60Hz.
Closed-Loop Load Cell Accuracy You Can Trust
At the heart of this machine sits the latest closed-loop load cell technology. Test load is applied through a control unit combining a load cell, a DC motor, and an electronic measurement and control unit. The payoff is highly accurate Brinell measurements at every test load, holding to within 0.5%.
- No load overshoot or undershoot like traditional dead weight, open-loop systems
- No mechanical weights, so friction problems disappear
- Less sensitive to misalignment caused by vibration
- Automatic load, hold, and unload control across all forces
Automated Testing Features That Do the Work for You
Every step that used to demand a steady hand is now automatic. Set your specimen, press the button, and watch the results appear.
- Automatic Focus with no manual lifting screw to adjust
- Automatic lifting with click lifting and one-button test
- Automatic rotating turret that rotates the pressure head with the objective
- Automatic measurement with hardness resolution of 0.1HBW
- Real-time loading display with an 8s loading time and adjustable charge time of 1–99s
Results convert automatically into Vickers and Rockwell values, and you can add an optional printer to print full test reports.
Wide Scale Coverage on the Phase II Plus 900-357 Automatic Brinell Tester
This machine spans a broad set of Brinell scales and test forces, so you can match the right combination to nearly any material and specimen thickness.
- Scales: HBW2.5/31.25, HBW2.5/62.5, HBW2.5/187.5, HBW5/62.5, HBW5/125, HBW5/250, HBW5/750, HBW10/100, HBW10/250, HBW10/500, HBW10/1000, HBW10/1500, HBW10/3000
- Test forces (Class 11): from 31.25kgf (306.5N) up to 3000kgf (29420N)
- Hardness test range: 3.18~653HBW
Built to meet EN ISO 6506, ASTM E-10-08, GB/T231.2, and JJG150-2005, it delivers results that hold up to recognized standards.
Indenters and Objectives
Five work stations give you room to keep tooling ready and switch without downtime. The station layout can be fitted with 2 objectives and 3 pressure heads.
- 3 Indenters: 10mm, 5mm, and 2.5mm
- Objectives: 1X and 2X
- Eyepiece: 20X
- Total magnification: 20X and 40X
- Large 12-inch display for clear viewing of the loading process and readings
Room for Large Parts With the Phase II Plus 900-357 Brinell Hardness Testing Machine
Bigger specimens are no problem. The generous working envelope lets you test tall and wide parts without extra fixturing.
- Maximum specimen height: 330mm
- Pressure head to outer wall distance: 170mm
Combined with automatic lifting, you can load heavy or oversized components and let the machine bring them into position on its own.
Product Specs
| Model | 900-357 |
|---|---|
| Brand | Phase II Plus |
| Scales | HBW2.5/31.25, HBW2.5/62.5, HBW2.5/187.5, HBW5/62.5, HBW5/125, HBW5/250, HBW5/750, HBW10/100, HBW10/250, HBW10/500, HBW10/1000, HBW10/1500, HBW10/3000 |
| Test Force (Class 11) | 31.25kgf(306.5N), 62.5kgf(612.9N), 100kgf(980.7N), 125kgf(1226N), 187.5kgf(1839N), 250kgf(2452N), 500kgf(4903N), 750kgf(7355N), 1000kgf(8907N), 1500kgf(14710N), 3000kgf(29420N) |
| Hardness Read | Automatic measurement |
| Unit Conversion | Automatic Conversion: Vickers, Rockwell |
| Screen | 12-inch display |
| Loading Process | Real-time display, loading time 8s |
| Load Control | Automatic (load / hold / unload) |
| Work Stations | Five stations, can be equipped with 2 objectives, 3 pressure head |
| Up and Down | Automatic lifting, click lifting, one-button test |
| Focus | Automatic Focus, no manual lifting screw focus |
| Turret | Automatic rotating tower, pressure head with objective automatically rotating |
| Maximum Height of Specimen | 330mm |
| Pressure Head-Outer Wall Distance | 170mm |
| Objective | 1X, 2X |
| Eyepiece | 20X |
| Total Magnification | 20X, 40X |
| Hardness Resolution | 0.1HBW |
| Time of Charge | 1–99s |
| Hardness Test Range | 3.18~653HBW |
| Implementation Standards | EN ISO 6506, ASTM E-10-08, GB/T231.2, JJG150-2005 |
| Data Output | Optional connection printer print report |
| Power Supply | AC220+5%, 50~60Hz |
| External Dimension | 595 × 245 × 1000mm |
| Weight | 300lbs |
Precision Testing With the Phase II 900-357 Hardness Tester
Tired of load overshoot and manual focus slowing down your Brinell testing? Meet a fully automatic tester built to remove the guesswork. With direct touch screen controls, a load cell driven system, and one-button testing, you get repeatable, accurate readings without wrestling with screws, dead weights, or misalignment. Just position your specimen and let the machine handle loading, focus, and measurement.
- Load Control: Closed-loop load cell system applies force with no overshoot or undershoot, accurate to within 0.5%.
- Full Automation: Automatic focus, lifting, turret rotation, and measurement mean one-button testing from start to finish.
- Touch Screen: 12-inch display shows real-time loading progress and results.
- Scale Coverage: Supports HBW2.5, HBW5, and HBW10 scales across forces from 31.25kgf to 3000kgf.
- Hardness Range: Reads 3.18~653HBW with 0.1HBW resolution.
- Unit Conversion: Converts readings to Vickers and Rockwell automatically.
- Tooling Capacity: Five work stations hold up to 2 objectives and 3 pressure heads for fast switching.
- Optics: 1X and 2X objectives with a 20X eyepiece for 20X and 40X total magnification.
- Specimen Size: Fits parts up to 330mm tall with 170mm of pressure head to outer wall clearance.
- Standards Met: Complies with EN ISO 6506, ASTM E-10-08, GB/T231.2, and JJG150-2005.
- Reporting: Optional printer connection for printed test reports.
- Power: Runs on AC220+5%, 50~60Hz.
Closed-Loop Load Cell Accuracy You Can Trust
At the heart of this machine sits the latest closed-loop load cell technology. Test load is applied through a control unit combining a load cell, a DC motor, and an electronic measurement and control unit. The payoff is highly accurate Brinell measurements at every test load, holding to within 0.5%.
- No load overshoot or undershoot like traditional dead weight, open-loop systems
- No mechanical weights, so friction problems disappear
- Less sensitive to misalignment caused by vibration
- Automatic load, hold, and unload control across all forces
Automated Testing Features That Do the Work for You
Every step that used to demand a steady hand is now automatic. Set your specimen, press the button, and watch the results appear.
- Automatic Focus with no manual lifting screw to adjust
- Automatic lifting with click lifting and one-button test
- Automatic rotating turret that rotates the pressure head with the objective
- Automatic measurement with hardness resolution of 0.1HBW
- Real-time loading display with an 8s loading time and adjustable charge time of 1–99s
Results convert automatically into Vickers and Rockwell values, and you can add an optional printer to print full test reports.
Wide Scale Coverage on the Phase II Plus 900-357 Automatic Brinell Tester
This machine spans a broad set of Brinell scales and test forces, so you can match the right combination to nearly any material and specimen thickness.
- Scales: HBW2.5/31.25, HBW2.5/62.5, HBW2.5/187.5, HBW5/62.5, HBW5/125, HBW5/250, HBW5/750, HBW10/100, HBW10/250, HBW10/500, HBW10/1000, HBW10/1500, HBW10/3000
- Test forces (Class 11): from 31.25kgf (306.5N) up to 3000kgf (29420N)
- Hardness test range: 3.18~653HBW
Built to meet EN ISO 6506, ASTM E-10-08, GB/T231.2, and JJG150-2005, it delivers results that hold up to recognized standards.
Indenters and Objectives
Five work stations give you room to keep tooling ready and switch without downtime. The station layout can be fitted with 2 objectives and 3 pressure heads.
- 3 Indenters: 10mm, 5mm, and 2.5mm
- Objectives: 1X and 2X
- Eyepiece: 20X
- Total magnification: 20X and 40X
- Large 12-inch display for clear viewing of the loading process and readings
Room for Large Parts With the Phase II Plus 900-357 Brinell Hardness Testing Machine
Bigger specimens are no problem. The generous working envelope lets you test tall and wide parts without extra fixturing.
- Maximum specimen height: 330mm
- Pressure head to outer wall distance: 170mm
Combined with automatic lifting, you can load heavy or oversized components and let the machine bring them into position on its own.
Product Specs
| Model | 900-357 |
|---|---|
| Brand | Phase II Plus |
| Scales | HBW2.5/31.25, HBW2.5/62.5, HBW2.5/187.5, HBW5/62.5, HBW5/125, HBW5/250, HBW5/750, HBW10/100, HBW10/250, HBW10/500, HBW10/1000, HBW10/1500, HBW10/3000 |
| Test Force (Class 11) | 31.25kgf(306.5N), 62.5kgf(612.9N), 100kgf(980.7N), 125kgf(1226N), 187.5kgf(1839N), 250kgf(2452N), 500kgf(4903N), 750kgf(7355N), 1000kgf(8907N), 1500kgf(14710N), 3000kgf(29420N) |
| Hardness Read | Automatic measurement |
| Unit Conversion | Automatic Conversion: Vickers, Rockwell |
| Screen | 12-inch display |
| Loading Process | Real-time display, loading time 8s |
| Load Control | Automatic (load / hold / unload) |
| Work Stations | Five stations, can be equipped with 2 objectives, 3 pressure head |
| Up and Down | Automatic lifting, click lifting, one-button test |
| Focus | Automatic Focus, no manual lifting screw focus |
| Turret | Automatic rotating tower, pressure head with objective automatically rotating |
| Maximum Height of Specimen | 330mm |
| Pressure Head-Outer Wall Distance | 170mm |
| Objective | 1X, 2X |
| Eyepiece | 20X |
| Total Magnification | 20X, 40X |
| Hardness Resolution | 0.1HBW |
| Time of Charge | 1–99s |
| Hardness Test Range | 3.18~653HBW |
| Implementation Standards | EN ISO 6506, ASTM E-10-08, GB/T231.2, JJG150-2005 |
| Data Output | Optional connection printer print report |
| Power Supply | AC220+5%, 50~60Hz |
| External Dimension | 595 × 245 × 1000mm |
| Weight | 300lbs |